-40%
Riedel 36 Ton Chiller, Air Cooled, AND Rehlser Heat Exchanger, Deionizer TW-HL40
Riedel 36 Ton Chiller, Air Cooled, AND Rehlser Heat Exchanger, Deionizer TW-HL40
Riedel 36 Ton Chiller, Air Cooled, AND Rehlser Heat Exchanger, Deionizer TW-HL40
Riedel 36 Ton Chiller, Air Cooled, AND Rehlser Heat Exchanger, Deionizer TW-HL40
Riedel 36 Ton Chiller, Air Cooled, AND Rehlser Heat Exchanger, Deionizer TW-HL40
Riedel 36 Ton Chiller, Air Cooled, AND Rehlser Heat Exchanger, Deionizer TW-HL40
Riedel 36 Ton Chiller, Air Cooled, AND Rehlser Heat Exchanger, Deionizer TW-HL40
Riedel 36 Ton Chiller, Air Cooled, AND Rehlser Heat Exchanger, Deionizer TW-HL40
Riedel 36 Ton Chiller, Air Cooled, AND Rehlser Heat Exchanger, Deionizer TW-HL40
Riedel 36 Ton Chiller, Air Cooled, AND Rehlser Heat Exchanger, Deionizer TW-HL40

Riedel 36 Ton Chiller, Air Cooled, AND Rehlser Heat Exchanger, Deionizer TW-HL40

$ 6072

Availability: 20 in stock
  • Item Height: 78
  • BTU Cooling Rating: 25000 BTU or Greater
  • Suitable For: Injection & Blow Molding
  • Item Length: 111
  • Amperage: 36 Amp
  • Power Phase: 3 Phase
  • Brand: Riedel
  • Condition: Very good working condition, low hours, used in a laboratory environment
  • Model: PC1000.00-NE
  • Material: Stainless Steel
  • Cooling Capacity: 36 ton
  • MPN: PC 1000.00-NE
  • Item Weight: 2500 lbs
  • Tank Capacity: 100 gal
  • Voltage: 480Vac 3 Phase
  • Item Width: 34
  • Manufacturer: Riedel
  • Supply Voltage: 460 V
  • Power: 42.2 kw
  • Year Manufactured: 1999
  • Installation Area: Indoor
  • Type: Air Cooled Chiller
  • Country/Region of Manufacture: Germany

    Description

    36 Ton Riedel air cooled chiller - very good working condition, was used to chill a laser that we have retired.  Was used in a laboratory environment since new.  Well built reliable chiller.
    Rehlser Heat Exchanger, Deionizer TW-HL40.  Was used in with the chiller to provide deionized cooling for a Laser.  The deionized side is used for the equipment that is being cooled.  The pump in the unit circulates the deionized water and passes it through deionizing filters.  The heat is extracted by pumping cold water through the heat exchanger.  Deionizing filters can be removed if normal water is required.  See last picture for electrical requirements and other product details.
    We have a loading dock and forklift and can load for free.  NOTE: weight and dimensions listed above are for the chiller only!!  (2500 pounds, 111" by 34" by 78" tall)  the heat exchanger is ~2200 pounds and 89" by 34" by 73" tall.  We are willing to sell each one individually.