Finsh 1 2 K HS Urethane Primer KIT High Build DTM Prime FP415 Gal FH416Q

Description

FP415 is a premium two-component primer surfacer DTM designed for high build and excellent filling of repairs. It provides excellent adhesion and gloss / color holdout. FP415 sands easily without clogging the sandpaper, while providing excellent resistance to sand scratch swelling.
1 Gallon
FP415 is a two component, low VOC primer surfacer. This gray primer offers a high film build,    excellent gloss holdout, and excellent sanding characteristics.
mix 4:1 with hardener FH415G  And FH416Q Made in the USA
Substrates:
For complete refinishing of larger bare metal areas, it is recommended to use an etch primer to ensure complete corrosion protection.
Treated Aluminum
Fiberglass/SMC
OEM Finishes
Refinish Lacquers, Enamels, and Urethanes
Etching Primers
Color Gray
Application:
Adjust air pressure to: 30-40 psi for siphon feed gun, 20-30 psi for gravity feed gun, 30-40 psi for pressure feed gun with 5-10 psi pot pressure, 5-7 psi at the cap for HVLP gun
Apply 2-3 medium coats, ata a gun distance of 5"-7", with 5-10 minutes flash time between coats
Recommended dry film thickness after sanding is 2.0-2.5 mils.
Maximum dry film thickness is 6 mils after sanding
Clean spray gun with an appropriate gun cleaner, immediately after use
Drying:
Air Dry: 1.5-3 hours @ 70°F
Force Dry: 30 minutes @ 140°
Short Wave Infrared: 15 minutes on high setting @ 24" inches distance - Purge for 10 minutes before using short wave infrared
To sand: 2 hours for air dry, and upon cool down for force dry and short wave infrared.
Final Sanding:
To seal - P400
To topcoat - P600
You will receive 1 gal of FP415 and 1 qt of FH416  Any questions please e-mail or call Cliffs Auto Parts at 1-800-287-6152 . 8 AM TO 6 PM  Monday - Friday  Saturday 9 AM TO 4 PM  Cliffs Auto Parts 4727 Conowingo RD Darlington MD 21034 .
Shipping is in continental US
Cliffs Auto Parts Thank you for your business 1-800-287-6152
Cliffs Auto Parts