-40%

EPOXY PRIMER FAST DRY DTM GREY PRIMER/SEALER GALLON KIT WITH GALLON ACTIVATOR

$ 87.78

Availability: 20 in stock
  • Returns Accepted: Returns Accepted
  • Factory Color Code: GREY
  • Manufacturer Color Name: GREY
  • Item must be returned within: 30 Days
  • Manufacturer Part Number: EPOXY PRIMER GREY
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Return shipping will be paid by: Buyer
  • Type: Epoxy Primer
  • Brand: DISTINTIVE IMAGE
  • Items Included: Activator/Hardener
  • Color: GREY
  • Restocking Fee: 20%
  • Condition: New

    Description

    EPOXY PRIMER FAST DRY DTM GREY PRIMER/SEALER GALLON KIT WITH GALLON ACTIVATOR
    DESCRIPTION:
    DI-EP Epoxy Primer is a fast dry, fast curing epoxy that has excellent corrosion resistance and adhesion. This epoxy primer can be used on all properly prepared metals and plastics. DI-EP Epoxy Primer can be topcoated with any topcoat system including acrylic lacquer
    MIX RATIO:
    ►1 Parts DI-EP Epoxy Primer
    ►1 Part DI-EPA Epoxy Primer Activator
    (Optional) DI-EP Epoxy Primer can be reduced 5-10% with Urethane Grade Reducer. Adding reducer will increase sprayable V.O.C.’s and decrease dry film thickness (DFT)
    SUBSTRATES:
    ►Properly sanded and cleaned fiberglass or SMC
    ►Clean, sanded OEM finishes
    ►Clean, sanded cured aftermarket finishes
    ►Autobody fillers
    GUN SETUP:
    ►Conventional Gravity 1.6mm-1.8mm 40-45 psi @ gun
    ►Siphon 1.6mm-1.8mm 40-45 psi @ gun
    ►HVLP 1.6mm-1.8mm 8-10 psi @ gun
    SURFACE PREPERATION:
    Wash area with soap and warm water. Thoroughly clean area with Wax and Grease Remover. All corrosion should be removed and metal prepared as for any paint application. Old finishes must be properly sanded and cleaned with Wax and Grease Remover (or equivalent). Aluminum must be thoroughly sanded or etched before applying DI-EP Epoxy Primer.
    APPLICATION:
    Apply 1-2 full wet coats of DI-EP Epoxy Primer using a good quality spray gun with a 1.6 to 1.8 tip. Allow 10-15 minutes flash time between coats. Dry film thickness should be .75-1.0 mils. Allow 30-60 minutes @ 70°F (21°C) air dry before topcoating. DI-EP Epoxy Primer can be baked for 20 minutes @ 140°F (60°C). Allow 60-90 minutes @ 70°F (21°C) cure time before applying polyester body filler over DI-EP Epoxy Primer.
    SANDING:
    Allow DI-EP Epoxy Primer to thoroughly cure before sanding. DI-EP Epoxy Primer can be lightly sanded after 24 hours.
    FREE SHIPPING TO THE LOWER 48 STATES
    NO P.O. BOXES
    HAWAII & ALASKA EXTRA SHIPPING COST
    PROVISION Auto Body Supply
    Providing Quality to Professionals. Buy with confidence.
    ALASKA AND HAWAII EXTRA SHIPPING COST
    Check out my
    other items
    !
    for great deals.
    Be sure to add me to your
    favorites list
    !
    Sign up for my email newsletters
    by adding my eBay Store to your Favorites