-40%
1/2
1/2
1/2

1/2" NPT, 110V 120V AC Solenoid Valve Plastic Potable Water Normally Open N/O

$ 19.52

Availability: 185 in stock
  • Type: Normally Open, 2-way
  • Brand: EHCOTECH
  • Supply Voltage: 110-120 V AC
  • Pressure Rating: 3 to 90 psi, Vacuum
  • Inlet/Outlet Port Size: 1/2" NPT
  • Valve Body: Plastic: BASF Ultramid® PA 66 (Nylon 66)
  • MPN: N21E-1/2-OC-120VAC-ES
  • Condition: New
  • Restocking Fee: No
  • Return shipping will be paid by: Seller
  • All returns accepted: Returns Accepted
  • Item must be returned within: 30 Days
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Max Media Temp: 175 F / 80 C

    Description

    N21E-1/2-CC-12VDC-ES
    Valves4projects — supplying high quality valves since 2004.  Over 50,000 valve orders shipped.
    EHCO
    TECH  N21E-1/2-OC-120VAC-ES  SOLENOID VALVE
    1/2" NPT  |  120-Volt AC EHCO-Smart Coil | BASF Ultramid® PA 66 Body / EPDM Diaphragm |
    Normally Open
    |  3 - 90 psi
    EHCOTECH N21-Series solenoid valves are an affortable but amazingly robust and dependable choice for a variety of water, air, and other general purpose liquid applications. Media being controlled must be compatible with Nylon 66, EPDM rubber, and Stainless Steel (300 and 400 series). The N21-series valves are semi-direct acting, making them suitable for many low differential pressure applications where traditional, pilot operated, solenoid valves may not perform reliably.
    The N21-Series uses an EHCO-Smart coil with an internal “hit-and-hold” circuitry. The EHCO-Smart coil drastically drops the “hold” voltage and amperage to maintain a lower coil temperature for long coil life.
    General
    2-way,
    Normally Open
    (energize to close, de-energize to open), unidirectional
    Fast acting
    Port / Orifice Size
    1/2" NPT
    (female) inlet / outlet ports
    Outer thread diameter / TPI (threads per inch):  0.840 inches / 14 TPI
    Internal orifice diameter: 1/2" or 15.0 mm
    C
    v
    value:  4.8
    Pressure and Temperature
    3 to 90 psi
    or Vacuum
    Max media temp: 175° F (80° C)
    Suitable Media
    Water (including potable water)
    Air
    Inert Gases
    Other media compatible with valve materials
    Coil / Electrical
    120-Volt AC
    22 Watt initial power draw; drops to 6 watts as soon as valve closes
    DIN Connector coil (DIN 43650)
    Allows installer to run their own wires or cable into the included connector
    Screw-down terminals inside the connector for wire connections
    DIN connector housing can be pointed up, down, left, or right
    Coil IP rating: 65
    NOTE: We also carry this valve in 12VDC, 24 VAC, 24VDC, and 220/240VAC voltages in our
    eBay store
    Valve Materials
    Valve body:  BASF Ultramid® PA 66 (Nylon)
    Plunger and plunger guide tube: Stainless Steel (300 and 400 series)
    Diaphragm:  EPDM
    Dimensions
    Height: 4.5"
    Width: 2-5/8"
    Length: 3"
    Store Policies
    If you are not completely satisfied, please contact us and we will make it right!
    12 month warranty
    Copyright © Ehcotech International Inc. 2017